Vaccum System SV-2
- The vacuum system is a device to provide negative pressure for die during die-casting.
- Vacuum die-casting can Improve density of the casting product, get rid of surface flow marks and gas porosity inside the casting product, reduce the difficulty of casting, increase qualified rate of casting product, extend service life of die, strengthen the casting product to enhance its pressure resistance, leakage resistance, and welding feature.
MODEL | SV-2 |
---|---|
Applied to D.C.M. | 800 Ton and below |
Nominal Displacement of Vacuum Pump |
63 m3 / Hr (50Hz) 76 m3 / Hr (60Hz) |
Nominal Motor Rating of Vacuum Pump (KW) |
1.8 KW (50Hz) 2.2 KW (60Hz) |
Volume of Tank (L) | 150 L |
Dimensions (mm) | 1150(L) x 600(W) x 1150(H) |