Cold Chamber Die Casting Machine SD-730 CF
Cold Chamber Die Casting Machine SD-730 CF
Advanced Zinc Die Casting Machine Equipment

Powerful Performance. Fast Cycle Time. Efficient & Stable. Easy To Use.

Item Units SD-730 CF
Die locking force KN 7300
Die platen dimensions (HxW) mm 1230x1230
Space between tie bars mm 852x852
Tie bar diameter mm 160
Die stroke mm 660
Die thickness mm 350~900
Solenoid valve for core Piece 1/2"x3
Hydraulic outlet Set 3/4"x5
Injection force KN 550
Plunger stroke mm 670
Plunger-tip projection distance mm 300
Injection port position mm -175
Dry shot speed M/S 6 7 8
Plunger-tip diameter mm Min.
70
Sta.
80
Max.
90
Maximun casting pressure Mpa 140.5 107.7 85.1
Casting area cm² 462
582
604
760
764
962
Actual shot weight Kg 5 6.6 8.3
Ejection force KN 300
Ejection Stroke mm 125
Hydraulic motor kw 37
Amount of hydraulic fluid L 800
Amount of cooling water for oil cooling L/min 80
Amount of cooling water for die casting cooling L/min 50-90
Machine weight ton 60
Machine size mm 8046x2335x3413
Model 650 CF
CONTROLLER PART
Color touch screen
Alarm display
Injection terms setting
Screen print
PLATEN PART
Cycle time setting
Die open lubricating setting
Ejection stroke setting from screen
Movable platen adjustment
Toggles auto lubricating system
Auto tie bar puller
CORE PART
Selection of core movement timer
Selection of core pressure during injection
Movable core 1
Movable core 2
Fixed core 3
Pressure reducing valve for movable core 1&2
Pressure reducing valve for fixed core 3
INJECTION PART
Motorized injection valve
Injection curve display
Die cast conditions management
Injection speed display
Injection pressure display
Injection data display
Plunger-tip projection setting
Injection vacuum movement setting
Shot sleeve clean setting
Plunger-tip lubricating setting
Injection stroke setting from screen
Magnetic non-contact sensor
Intensifying pressure adjustment
HYDRAULIC & COOLING PART
Hydraulic oil temperature sensor
Hydraulic oil level sensor
Enhanced cooler  
Auto pressure release device
Hydraulic oil filter device
SAFETY PART
Manual safety door
Full cover auto safety door
Non-operator side safety fence (without auto extractor)
Emegency stop
OTHERS
Energy saving system
Digital die locking force display
Quick mould change system
Squeeze pin interface
Piston accumulator
Movable platen reinforce board
AUXILIARIES
Auto ladler: Molten metal volume calculating
Auto adjustment for molten metal supply standby timer
Ladle descending position setting
Molten metal volume from screen
Auto extractor die height auto adjust
Auto sprayer die height auto adjust
Auto sprayer: Up down movement spray
Spray setting for male, female mold
Spray setting for cores
Fast auto production
 Standard   Option    Not Available
ADD TO INQUIRY

© 2018 TECHNOLOGY BASE CORPORATION All rights reserved.- Site Map