Cold Chamber Die Casting Machine SD-900 CF
Advanced Cold Chamber Die Casting Machine
Powerful Performance. Fast Cycle Time. Efficient & Stable. Easy To Use.
| Item | Units | SD-900 CF | ||
|---|---|---|---|---|
| Die locking force | KN | 9000 | ||
| Die platen dimensions (HxW) | mm | 1400x1400 | ||
| Space between tie bars | mm | 931x931 | ||
| Tie bar diameter | mm | 190 | ||
| Die stroke | mm | 760 | ||
| Die thickness | mm | 400~950 | ||
| Solenoid valve for core | Piece | 1/2"x3 | ||
| Hydraulic outlet | Set | 3/4"x5 | ||
| Injection force | KN | 653 | ||
| Plunger stroke | mm | 750 | ||
| Plunger-tip projection distance | mm | 350 | ||
| Injection port position | mm | -250 or -275 | ||
| Dry shot speed | M/S | 7 | 8 | |
| Plunger-tip diameter | mm |
Min. 80 |
Sta. 90 |
Max. 100 |
| Maximun casting pressure | Mpa | 130 | 102.8 | 83.1 |
| Casting area | cm² |
653 904 |
826 1144 |
1022 1414 |
| Actual shot weight | Kg | 7.3 | 9.2 | 11.4 |
| Ejection force | KN | 340 | ||
| Ejection Stroke | mm | 125 | ||
| Hydraulic motor | kw | 45 | ||
| Amount of hydraulic fluid | L | 860 | ||
| Amount of cooling water for oil cooling | L/min | 150 - 180 | ||
| Amount of cooling water for die casting cooling | L/min | 150 | ||
| Machine weight | ton | 50 | ||
| Machine size | mm | 9990x2450x3556 | ||
| Model | 850 CF |
|---|---|
| CONTROLLER PART | |
| Color touch screen |
|
| Alarm display |
|
| Injection terms setting |
|
| Screen print |
|
| PLATEN PART | |
| Cycle time setting |
|
| Die open lubricating setting |
|
| Ejection stroke setting from screen |
|
| Movable platen adjustment |
|
| Toggles auto lubricating system |
|
| Auto tie bar puller |
|
| CORE PART | |
| Selection of core movement timer |
|
| Selection of core pressure during injection |
|
| Movable core 1 |
|
| Movable core 2 |
|
| Fixed core 3 |
|
| Pressure reducing valve for movable core 1&2 |
|
| Pressure reducing valve for fixed core 3 |
|
| INJECTION PART | |
| Motorized injection valve |
|
| Injection curve display |
|
| Die cast conditions management |
|
| Injection speed display |
|
| Injection pressure display |
|
| Injection data display |
|
| Plunger-tip projection setting |
|
| Injection vacuum movement setting |
|
| Shot sleeve clean setting |
|
| Plunger-tip lubricating setting |
|
| Injection stroke setting from screen |
|
| Magnetic non-contact sensor |
|
| Intensifying pressure adjustment |
|
| HYDRAULIC & COOLING PART | |
| Hydraulic oil temperature sensor |
|
| Hydraulic oil level sensor |
|
| Enhanced cooler | |
| Auto pressure release device |
|
| Hydraulic oil filter device |
|
| SAFETY PART | |
| Manual safety door |
|
| Full cover auto safety door |
|
| Non-operator side safety fence (without auto extractor) |
|
| Emegency stop |
|
| OTHERS | |
| Energy saving system |
|
| Digital die locking force display |
|
| Quick mould change system |
|
| Squeeze pin interface |
|
| Piston accumulator |
|
| Movable platen reinforce board |
|
| AUXILIARIES | |
| Auto ladler: Molten metal volume calculating |
|
|
Auto adjustment for molten metal supply standby timer |
|
| Ladle descending position setting |
|
| Molten metal volume from screen |
|
| Auto extractor die height auto adjust |
|
| Auto sprayer die height auto adjust |
|
| Auto sprayer: Up down movement spray |
|
| Spray setting for male, female mold |
|
| Spray setting for cores |
|
| Fast auto production |
|
|
Standard Option Not Available
|
|
