Cold Chamber Die Casting Machine SD-280 CF
Advanced Type HPDC Machine
Powerful Performance. Fast Cycle Time. Efficient & Stable. Easy To Use.
Item | Units | SD-280 CF | ||
---|---|---|---|---|
Die locking force | KN | 280 | ||
Die platen dimensions (HxW) | mm | 850x904 | ||
Space between tie bars | mm | 584x584 | ||
Tie bar diameter | mm | 110 | ||
Die stroke | mm | 380 | ||
Die thickness | mm | 250~600 | ||
Solenoid valve for core | Piece | 3/8"x1 | 3/8"x2 | |
Hydraulic outlet | Set | 1/2"x2 | 1/2"x3 | |
Injection force | KN | 265 | ||
Plunger stroke | mm | 370 | ||
Plunger-tip projection distance | mm | 150 | ||
Injection port position | mm | -125 | ||
Dry shot speed | M/S | 6 | 7 | 8 |
Plunger-tip diameter | mm |
Min. 50 |
Sta. 60 |
Max. 70 |
Maximun casting pressure | Mpa | 132.8 | 92.3 | 67.7 |
Casting area | cm² |
184 287 |
265 413 |
361 563 |
Actual shot weight | Kg | 1.40 | 2.02 | 2.75 |
Ejection force | KN | 123.5 | ||
Ejection Stroke | mm | 80 | ||
Hydraulic motor | kw | 18.5 | ||
Amount of hydraulic fluid | L | 370 | ||
Amount of cooling water for oil cooling | L/min | 25 | ||
Amount of cooling water for die casting cooling | L/min | 25-50 | ||
Machine weight | ton | 9.4 | ||
Machine size | mm | 5613x1650x2616 |
Model | 250 CF |
---|---|
CONTROLLER PART | |
Color touch screen | |
Alarm display | |
Injection terms setting | |
Screen print | |
PLATEN PART | |
Cycle time setting | |
Die open lubricating setting | |
Ejection stroke setting from screen | |
Movable platen adjustment | |
Toggles auto lubricating system | |
Auto tie bar puller | |
CORE PART | |
Selection of core movement timer | |
Selection of core pressure during injection | |
Movable core 1 | |
Movable core 2 | |
Fixed core 3 | |
Pressure reducing valve for movable core 1&2 | |
Pressure reducing valve for fixed core 3 | |
INJECTION PART | |
Motorized injection valve | |
Injection curve display | |
Die cast conditions management | |
Injection speed display | |
Injection pressure display | |
Injection data display | |
Plunger-tip projection setting | |
Injection vacuum movement setting | |
Shot sleeve clean setting | |
Plunger-tip lubricating setting | |
Injection stroke setting from screen | |
Magnetic non-contact sensor | |
Intensifying pressure adjustment | |
HYDRAULIC & COOLING PART | |
Hydraulic oil temperature sensor | |
Hydraulic oil level sensor | |
Enhanced cooler | |
Auto pressure release device | |
Hydraulic oil filter device | |
SAFETY PART | |
Manual safety door | |
Full cover auto safety door | |
Non-operator side safety fence (without auto extractor) | |
Emegency stop | |
OTHERS | |
Energy saving system | |
Digital die locking force display | |
Quick mould change system | |
Squeeze pin interface | |
Piston accumulator | |
Movable platen reinforce board | |
AUXILIARIES | |
Auto ladler: Molten metal volume calculating | |
Auto adjustment for molten metal supply standby timer | |
Ladle descending position setting | |
Molten metal volume from screen | |
Auto extractor die height auto adjust | |
Auto sprayer die height auto adjust | |
Auto sprayer: Up down movement spray | |
Spray setting for male, female mold | |
Spray setting for cores | |
Fast auto production | |
Standard Option Not Available |